![]() Our 67% copper bottom paint with SCX provides extended antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only. 85 x 2 (2 coats)= Total / 300 feet = Gallons RequiredĪn average boater that goes out on the water for 100 to 500 hours a year will get anti-fouling protection of approximately 2-3 years. ![]() To figure out the amount of paint required: Length x Beam x. Our best marine bottom paint coating - loaded with 67% copper, ablative with SCX - Slime Control Xtra.Ĭovers approximately 300 square feet per gallon 2 coats of the copper bottom paint needed for proper application - 3rd coat recommended on the waterline ABLATIVE CO-POLYMER ADVANCED TECHNOLOGY.PROTECTION FROM EXTREME FOULING CONDITIONS. ![]() YOU CAN RELAUNCH YOUR BOAT WITHOUT REPAINTING AGAIN!."67% Copper Boat/Marine Bottom Paint w/ SCX was the ONLY product rated "EXCELLENT" in the high copper ablative category at both test sites, and beat Interlux Micron Extra, Micron 66, Micron CSC, and beat Pettit Ultima Pro, Ultima SR, and beat Seahawk Biocop TF, Cukote, Cukote Biocide Plus & Islands 77, and West Marine PCA & CPP hands down." - March, 2009 - Practical Sailor. "Since the ratings first came out in 2009, we have been pleased: 67% Copper Boat/Marine Bottom Paint w/ SCX is now officially the Best Value AND the Highest Rated bottom paint tested independently by Practical Sailor, March, 2009." 67% Copper Boat/Marine Bottom Paint w/ SCX
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |